Delivering Australia's Bottom End since 1991
Delivering Australia's Bottom End since 1991
Darkglass Microtubes X
Distorting bass has always been a very challenging engineering endeavor: in order to achieve a punchy, and aggressive distortion that is also full and fat-sounding you need to reconcile two contradicting conditions: The tightness comes from attenuating bass frequencies before saturation, which will also result in a very thin signal. But boosting the lows will result in additional, unwanted fuzz. The Microtubes X is our solution to that problem in a very compact form: The signal is split by two variable low-pass and high-pass filters at the very very beginning. The high-pass signal (mostly mids and treble) is distorted using CMOS circuitry, just like our older Microtubes pedals. The low pass-signal (all bass) is left untouched. Letting the high side be all crunch, attack, and rich harmonics while mixing back the lows to add gargantuan size to the overall mix. The result is virtually unlimited fullness, size, aggression, and definition, regardless of how old the strings, and boomy or thin instruments. The Microtubes X offers all of this in a compact form, with very few controls to tweak, making it almost impossible to go wrong.
High-pass frequency: controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.
Low-pass frequency: controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.
Level: Sets the overall output volume of the unit.
Drive: Sets the amount of distortion for the high pass side.
Mix: Sets the blend between low-pass and high-pass signals.
Mids: Active mid control placed after the Mix control. +-12dB @ 500Hz. Input: 1/4" connector for the instrument.
Input Impedance: 1MΩ impedance.
Output: 1/4" connector for the amplifier or next effect in the chain.
Output Impedance: 1kΩ.
9VDC: Center negative, regulated 9VDC only.
Current Consumption: 30mA EAN: 6430054580274
Packed Size: 90x138x75 mm
Packed Weight: 0.430 KG
Unpacked Size: 64x111x43 mm
Unpacked Weight: 0.25 KG
We offer Afterpay, Zip Money or Studio 19 Rentals
ZIP MONEY, Buy Now, Pay Later. 0% INTEREST
Get 3 Months INTEREST FREE on purchases under $1000
Get 6 Months INTEREST FREE on purchases over $1000
You get the gear now and pay later
CLICK HERE for T&C's and Application form, it only takes a minute
AFTERPAY, Buy Now, Pay Later. 0% INTEREST
Selecting Afterpay allows you Buy Now and Pay Later. Pay in 4 Interest Free payments over an 8 week period, easy as that.
More Info : https://www.afterpay.com/en-AU/how-it-works
STUDIO 19 RENTAL OPTION
Why not rent the gear you want? Rental payments are listed on each product, you can choose either a 6 month or 12 month minimum rental period contract. You can choose to purchase your gear during the contract, you can return the goods after the rental period or you can continue renting. Rental Payments and buy out figures are listed on all applicable products. Click HERE for more details
Paying by Bank Transfer
Shipping rates are shown when you take an item into the shopping cart and enter your address. You do not need to complete an order to see the freight rates.
We do our best to keep shipping costs to a minimum by absorbing what we can.
Heavy items may incur additional freight charges, based on courier rates. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
All strings and accessories will be shipped with tracking via courier or Australia Post. Other items including guitars and amplification equipment will be shipped using our courier service providers, with a tracking number and signature on delivery. Please note that all instruments, amplifiers and large items will require a signature on delivery. We cannot give authority to leave an item without a signature
Occasionally, due to issues with delivering to remote or unusual destinations, we aren't able to offer shipping. We reserve the right to cancel an order if freight costs are exessive. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
Its a vast country and unfortunately freight costs have increased significantly. If we see an issue we will contact you to discuss and we will always offer a full refund.
Feel free to contact us if you have an inquiry regarding freight
Darkglass Microtubes X
Distorting bass has always been a very challenging engineering endeavor: in order to achieve a punchy, and aggressive distortion that is also full and fat-sounding you need to reconcile two contradicting conditions: The tightness comes from attenuating bass frequencies before saturation, which will also result in a very thin signal. But boosting the lows will result in additional, unwanted fuzz. The Microtubes X is our solution to that problem in a very compact form: The signal is split by two variable low-pass and high-pass filters at the very very beginning. The high-pass signal (mostly mids and treble) is distorted using CMOS circuitry, just like our older Microtubes pedals. The low pass-signal (all bass) is left untouched. Letting the high side be all crunch, attack, and rich harmonics while mixing back the lows to add gargantuan size to the overall mix. The result is virtually unlimited fullness, size, aggression, and definition, regardless of how old the strings, and boomy or thin instruments. The Microtubes X offers all of this in a compact form, with very few controls to tweak, making it almost impossible to go wrong.
High-pass frequency: controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.
Low-pass frequency: controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.
Level: Sets the overall output volume of the unit.
Drive: Sets the amount of distortion for the high pass side.
Mix: Sets the blend between low-pass and high-pass signals.
Mids: Active mid control placed after the Mix control. +-12dB @ 500Hz. Input: 1/4" connector for the instrument.
Input Impedance: 1MΩ impedance.
Output: 1/4" connector for the amplifier or next effect in the chain.
Output Impedance: 1kΩ.
9VDC: Center negative, regulated 9VDC only.
Current Consumption: 30mA EAN: 6430054580274
Packed Size: 90x138x75 mm
Packed Weight: 0.430 KG
Unpacked Size: 64x111x43 mm
Unpacked Weight: 0.25 KG
We offer Afterpay, Zip Money or Studio 19 Rentals
ZIP MONEY, Buy Now, Pay Later. 0% INTEREST
Get 3 Months INTEREST FREE on purchases under $1000
Get 6 Months INTEREST FREE on purchases over $1000
You get the gear now and pay later
CLICK HERE for T&C's and Application form, it only takes a minute
AFTERPAY, Buy Now, Pay Later. 0% INTEREST
Selecting Afterpay allows you Buy Now and Pay Later. Pay in 4 Interest Free payments over an 8 week period, easy as that.
More Info : https://www.afterpay.com/en-AU/how-it-works
STUDIO 19 RENTAL OPTION
Why not rent the gear you want? Rental payments are listed on each product, you can choose either a 6 month or 12 month minimum rental period contract. You can choose to purchase your gear during the contract, you can return the goods after the rental period or you can continue renting. Rental Payments and buy out figures are listed on all applicable products. Click HERE for more details
Paying by Bank Transfer
Shipping rates are shown when you take an item into the shopping cart and enter your address. You do not need to complete an order to see the freight rates.
We do our best to keep shipping costs to a minimum by absorbing what we can.
Heavy items may incur additional freight charges, based on courier rates. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
All strings and accessories will be shipped with tracking via courier or Australia Post. Other items including guitars and amplification equipment will be shipped using our courier service providers, with a tracking number and signature on delivery. Please note that all instruments, amplifiers and large items will require a signature on delivery. We cannot give authority to leave an item without a signature
Occasionally, due to issues with delivering to remote or unusual destinations, we aren't able to offer shipping. We reserve the right to cancel an order if freight costs are exessive. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
Its a vast country and unfortunately freight costs have increased significantly. If we see an issue we will contact you to discuss and we will always offer a full refund.
Feel free to contact us if you have an inquiry regarding freight



