Delivering Australia's Bottom End since 1991
Delivering Australia's Bottom End since 1991
Darkglass Microtubes 200 Bass Head
The Microtubes 200 is the slimmest and lightest amplifier ever offered by Darkglass. Packed with Aux-in and headphone output for quiet practicing and an intuitive push potentiometer for the mute and master control. Post-EQ balanced XLR DI output with switchable ground lift making these amps reliable for all sorts of musicians with an ample array of possibilities.
The compactness and lightweight make them flawless and convenient for rehearsals and live gigs, while an EQ section enhances the definition and clarity of sound across the spectrum.
Input: Use this jack to connect your instrument via a standard ¼” mono cable.
Drive: This knob controls the amount of distortion that the Microtubes B3K® Engine will deliver. It will change from a soft warm overdrive to a massive modern distortion sound.
Blend: Use this knob to mix between the Clean signal and the Distortion signal (Microtubes B3K® Engine).
Bass: +-12dB at 80Hz. Use this knob to change the low-end content of the signal.
Low Mids: +-12dB at 1kHz. This knob controls the low mid content of the signal.
High Mids: +-12dB at 3kHz. This knob controls the high mid content of the signal.
Treble: +-12dB at 5kHz. Use this knob to change the high content of the signal.
Master/Mute: Use this knob to control the overall volume of the amplifier. Use this push knob button to mute the amplifier.
Back Panel Features
Speaker Output: Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or ¼” speaker cable operation. WARNING: Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier. Minimum load 3Ω.
Ground Lift: Use this control to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal try changing the setting of this control.
DI Output: Use this connector to send your bypass signal to the console, mic preamp, interface, etc. The DI OUTPUT delivers only the bypass DI signal.
Headphone Output: Connect your Headphones and enjoy the analog cabinet emulation.
Aux In: Use this connector to play music from your laptop, phone, MP3 player, etc. This input is routed only to the headphone output without cabinet emulation.
AC Socket: Use this connector to feed electric power to the amplifier. 100 - 230 VAC, 50-60Hz.
AC Power ON/OFFUse this Switch to release the audio energy from your bass.
We offer Afterpay, Zip Money or Studio 19 Rentals
ZIP MONEY, Buy Now, Pay Later. 0% INTEREST
Get 3 Months INTEREST FREE on purchases under $1000
Get 6 Months INTEREST FREE on purchases over $1000
You get the gear now and pay later
CLICK HERE for T&C's and Application form, it only takes a minute
AFTERPAY, Buy Now, Pay Later. 0% INTEREST
Selecting Afterpay allows you Buy Now and Pay Later. Pay in 4 Interest Free payments over an 8 week period, easy as that.
More Info : https://www.afterpay.com/en-AU/how-it-works
STUDIO 19 RENTAL OPTION
Why not rent the gear you want? Rental payments are listed on each product, you can choose either a 6 month or 12 month minimum rental period contract. You can choose to purchase your gear during the contract, you can return the goods after the rental period or you can continue renting. Rental Payments and buy out figures are listed on all applicable products. Click HERE for more details
Paying by Bank Transfer
Shipping rates are shown when you take an item into the shopping cart and enter your address. You do not need to complete an order to see the freight rates.
We do our best to keep shipping costs to a minimum by absorbing what we can.
Heavy items may incur additional freight charges, based on courier rates. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
All strings and accessories will be shipped with tracking via courier or Australia Post. Other items including guitars and amplification equipment will be shipped using our courier service providers, with a tracking number and signature on delivery. Please note that all instruments, amplifiers and large items will require a signature on delivery. We cannot give authority to leave an item without a signature
Occasionally, due to issues with delivering to remote or unusual destinations, we aren't able to offer shipping. We reserve the right to cancel an order if freight costs are exessive. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
Its a vast country and unfortunately freight costs have increased significantly. If we see an issue we will contact you to discuss and we will always offer a full refund.
Feel free to contact us if you have an inquiry regarding freight
Darkglass Microtubes 200 Bass Head
The Microtubes 200 is the slimmest and lightest amplifier ever offered by Darkglass. Packed with Aux-in and headphone output for quiet practicing and an intuitive push potentiometer for the mute and master control. Post-EQ balanced XLR DI output with switchable ground lift making these amps reliable for all sorts of musicians with an ample array of possibilities.
The compactness and lightweight make them flawless and convenient for rehearsals and live gigs, while an EQ section enhances the definition and clarity of sound across the spectrum.
Input: Use this jack to connect your instrument via a standard ¼” mono cable.
Drive: This knob controls the amount of distortion that the Microtubes B3K® Engine will deliver. It will change from a soft warm overdrive to a massive modern distortion sound.
Blend: Use this knob to mix between the Clean signal and the Distortion signal (Microtubes B3K® Engine).
Bass: +-12dB at 80Hz. Use this knob to change the low-end content of the signal.
Low Mids: +-12dB at 1kHz. This knob controls the low mid content of the signal.
High Mids: +-12dB at 3kHz. This knob controls the high mid content of the signal.
Treble: +-12dB at 5kHz. Use this knob to change the high content of the signal.
Master/Mute: Use this knob to control the overall volume of the amplifier. Use this push knob button to mute the amplifier.
Back Panel Features
Speaker Output: Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or ¼” speaker cable operation. WARNING: Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier. Minimum load 3Ω.
Ground Lift: Use this control to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal try changing the setting of this control.
DI Output: Use this connector to send your bypass signal to the console, mic preamp, interface, etc. The DI OUTPUT delivers only the bypass DI signal.
Headphone Output: Connect your Headphones and enjoy the analog cabinet emulation.
Aux In: Use this connector to play music from your laptop, phone, MP3 player, etc. This input is routed only to the headphone output without cabinet emulation.
AC Socket: Use this connector to feed electric power to the amplifier. 100 - 230 VAC, 50-60Hz.
AC Power ON/OFFUse this Switch to release the audio energy from your bass.
We offer Afterpay, Zip Money or Studio 19 Rentals
ZIP MONEY, Buy Now, Pay Later. 0% INTEREST
Get 3 Months INTEREST FREE on purchases under $1000
Get 6 Months INTEREST FREE on purchases over $1000
You get the gear now and pay later
CLICK HERE for T&C's and Application form, it only takes a minute
AFTERPAY, Buy Now, Pay Later. 0% INTEREST
Selecting Afterpay allows you Buy Now and Pay Later. Pay in 4 Interest Free payments over an 8 week period, easy as that.
More Info : https://www.afterpay.com/en-AU/how-it-works
STUDIO 19 RENTAL OPTION
Why not rent the gear you want? Rental payments are listed on each product, you can choose either a 6 month or 12 month minimum rental period contract. You can choose to purchase your gear during the contract, you can return the goods after the rental period or you can continue renting. Rental Payments and buy out figures are listed on all applicable products. Click HERE for more details
Paying by Bank Transfer
Shipping rates are shown when you take an item into the shopping cart and enter your address. You do not need to complete an order to see the freight rates.
We do our best to keep shipping costs to a minimum by absorbing what we can.
Heavy items may incur additional freight charges, based on courier rates. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
All strings and accessories will be shipped with tracking via courier or Australia Post. Other items including guitars and amplification equipment will be shipped using our courier service providers, with a tracking number and signature on delivery. Please note that all instruments, amplifiers and large items will require a signature on delivery. We cannot give authority to leave an item without a signature
Occasionally, due to issues with delivering to remote or unusual destinations, we aren't able to offer shipping. We reserve the right to cancel an order if freight costs are exessive. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
Its a vast country and unfortunately freight costs have increased significantly. If we see an issue we will contact you to discuss and we will always offer a full refund.
Feel free to contact us if you have an inquiry regarding freight


