Delivering Australia's Bottom End since 1991
Delivering Australia's Bottom End since 1991
Mozztronics BP-2 Bass Preamp Pedal
Hand Made and Built in Australia
Inspired by the “Classic” Valve Bass Amps of yesteryear, Mozztronics have replicated the valve circuit in solid state with op-amps. With a tweaked and optimised tone stack for a a wide range of sounds.
Mozztronics write:
'We kept the inductor based mids control, which has five switchable frequency bands, to get as close as possible to the sound of the amplifiers you know and love. This unit is 100% analogue in the signal path. No digital simulations here.
There are two main uses for the Mozztronics Bass Preamp BP-2. The first is on a pedal board to add in a preset eq, or leave it on all the time to add extra tone capacity to your existing amplifier. The second is for home recording so you can get a great bass sound without micing up an amp.
Controls are exactly what you will expect to find. The main preamp controls are GAIN, BASS, MID, MID (frequency) switchable between five different frequencies, TREBLE, and VOLUME. We also have kept the ULTRA LOW and ULTRA HIGH tone contour switches. For best results start with VOLUME fully clockwise and adjust GAIN up to the desired level.
While the BP-2 bass preamp can get dirty with the GAIN cranked, for best results set the VOLUME to maximum, and the GAIN lower, and use a Mozztronics BOD-1 bass overdrive or BF-1 bass fuzz in front of this pedal to add in the dirt. The combination of the BOD-1 bass overdrive and the BP-2 bass preamp gets an excellent replication of a cranked “classic” valve bass amp.
If you are recording, as with any recorded track, you may need to apply some equalisation or other effects to the signal. Play around also if you have a VST cabinet simulator with your recording software. Try with your software VST and your favourite speaker response. There is no right or wrong, if it sounds good, then it is good.'
Does not come with power supply, Mozztronics uses the industry standard Boss style 2.1mm center negative 9V DC socket for the power supply connection. There is more than enough headroom with a 9VDC supply so there is no need for a separate 12VDC or 18VDC supply.
We offer Afterpay, Zip Money or Studio 19 Rentals
ZIP MONEY, Buy Now, Pay Later. 0% INTEREST
Get 3 Months INTEREST FREE on purchases under $1000
Get 6 Months INTEREST FREE on purchases over $1000
You get the gear now and pay later
CLICK HERE for T&C's and Application form, it only takes a minute
AFTERPAY, Buy Now, Pay Later. 0% INTEREST
Selecting Afterpay allows you Buy Now and Pay Later. Pay in 4 Interest Free payments over an 8 week period, easy as that.
More Info : https://www.afterpay.com/en-AU/how-it-works
STUDIO 19 RENTAL OPTION
Why not rent the gear you want? Rental payments are listed on each product, you can choose either a 6 month or 12 month minimum rental period contract. You can choose to purchase your gear during the contract, you can return the goods after the rental period or you can continue renting. Rental Payments and buy out figures are listed on all applicable products. Click HERE for more details
Paying by Bank Transfer
Shipping rates are shown when you take an item into the shopping cart and enter your address. You do not need to complete an order to see the freight rates.
We do our best to keep shipping costs to a minimum by absorbing what we can.
Heavy items may incur additional freight charges, based on courier rates. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
All strings and accessories will be shipped with tracking via courier or Australia Post. Other items including guitars and amplification equipment will be shipped using our courier service providers, with a tracking number and signature on delivery. Please note that all instruments, amplifiers and large items will require a signature on delivery. We cannot give authority to leave an item without a signature
Occasionally, due to issues with delivering to remote or unusual destinations, we aren't able to offer shipping. We reserve the right to cancel an order if freight costs are exessive. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
Its a vast country and unfortunately freight costs have increased significantly. If we see an issue we will contact you to discuss and we will always offer a full refund.
Feel free to contact us if you have an inquiry regarding freight
Mozztronics BP-2 Bass Preamp Pedal
Hand Made and Built in Australia
Inspired by the “Classic” Valve Bass Amps of yesteryear, Mozztronics have replicated the valve circuit in solid state with op-amps. With a tweaked and optimised tone stack for a a wide range of sounds.
Mozztronics write:
'We kept the inductor based mids control, which has five switchable frequency bands, to get as close as possible to the sound of the amplifiers you know and love. This unit is 100% analogue in the signal path. No digital simulations here.
There are two main uses for the Mozztronics Bass Preamp BP-2. The first is on a pedal board to add in a preset eq, or leave it on all the time to add extra tone capacity to your existing amplifier. The second is for home recording so you can get a great bass sound without micing up an amp.
Controls are exactly what you will expect to find. The main preamp controls are GAIN, BASS, MID, MID (frequency) switchable between five different frequencies, TREBLE, and VOLUME. We also have kept the ULTRA LOW and ULTRA HIGH tone contour switches. For best results start with VOLUME fully clockwise and adjust GAIN up to the desired level.
While the BP-2 bass preamp can get dirty with the GAIN cranked, for best results set the VOLUME to maximum, and the GAIN lower, and use a Mozztronics BOD-1 bass overdrive or BF-1 bass fuzz in front of this pedal to add in the dirt. The combination of the BOD-1 bass overdrive and the BP-2 bass preamp gets an excellent replication of a cranked “classic” valve bass amp.
If you are recording, as with any recorded track, you may need to apply some equalisation or other effects to the signal. Play around also if you have a VST cabinet simulator with your recording software. Try with your software VST and your favourite speaker response. There is no right or wrong, if it sounds good, then it is good.'
Does not come with power supply, Mozztronics uses the industry standard Boss style 2.1mm center negative 9V DC socket for the power supply connection. There is more than enough headroom with a 9VDC supply so there is no need for a separate 12VDC or 18VDC supply.
We offer Afterpay, Zip Money or Studio 19 Rentals
ZIP MONEY, Buy Now, Pay Later. 0% INTEREST
Get 3 Months INTEREST FREE on purchases under $1000
Get 6 Months INTEREST FREE on purchases over $1000
You get the gear now and pay later
CLICK HERE for T&C's and Application form, it only takes a minute
AFTERPAY, Buy Now, Pay Later. 0% INTEREST
Selecting Afterpay allows you Buy Now and Pay Later. Pay in 4 Interest Free payments over an 8 week period, easy as that.
More Info : https://www.afterpay.com/en-AU/how-it-works
STUDIO 19 RENTAL OPTION
Why not rent the gear you want? Rental payments are listed on each product, you can choose either a 6 month or 12 month minimum rental period contract. You can choose to purchase your gear during the contract, you can return the goods after the rental period or you can continue renting. Rental Payments and buy out figures are listed on all applicable products. Click HERE for more details
Paying by Bank Transfer
Shipping rates are shown when you take an item into the shopping cart and enter your address. You do not need to complete an order to see the freight rates.
We do our best to keep shipping costs to a minimum by absorbing what we can.
Heavy items may incur additional freight charges, based on courier rates. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
All strings and accessories will be shipped with tracking via courier or Australia Post. Other items including guitars and amplification equipment will be shipped using our courier service providers, with a tracking number and signature on delivery. Please note that all instruments, amplifiers and large items will require a signature on delivery. We cannot give authority to leave an item without a signature
Occasionally, due to issues with delivering to remote or unusual destinations, we aren't able to offer shipping. We reserve the right to cancel an order if freight costs are exessive. We will always notify you if there is an issue and offer a full refund or arrange alternative delivery options.
Its a vast country and unfortunately freight costs have increased significantly. If we see an issue we will contact you to discuss and we will always offer a full refund.
Feel free to contact us if you have an inquiry regarding freight

